|
cPCI Card |
CompactPCI is a very high performance industrial bus based on the standard PCI electrical specification in
rugged 3U or 6U Eurocard packaging.
PMC cards can be installed on CompactPCI adapters.
Contact factory for availability of PMC-to-CPCI adapters. |
|
Data Acquisition |
|
General Standards Corporation is a leading supplier in data acquisition I/O boards, provides a complete family of
data acquisition cards for sonar, industrial, and embedded applications on several form factors/busses, and for many operating systems.
Functions available include analog I/O, serial I/O, and high speed parallel I/O.
|
Form Factors: | |
FREE DRIVERS
AND
LOANER BOARDS |
|
|
|
Software Drivers: |
- Windows
|
- VxWorks
|
- QNX
|
- Linux
|
- MathWorks
|
- Solaris
|
- Labview
|
- xPC Target
|
- Ask About Other Drivers
|
|
- Up to 64 Input Channels per Board
- Programmable Sampling Rates to 50M SPS
- GPS Synchronization
- Auto-Calibration
- Multi-Board Synchronization
- Sigma-Delta and Delta-Sigma Analog I/O
- Resolutions from 12 bits to 24 bits
Analog I/O Selection Tables
- Serial Mode Protocols include Asynchronous, Bisync, SDLC, HDLC, IEEE 802.3, Synchronous Telemetry, Simple Clock/Data ("-SYNC" product line), and Di-phase.
- Transceiver support RS485, RS422, RS232, RS423, V.35, RS530, as well as other software selectable mixed protocol modes
- Up to Eight Independent Serial Channels per Board
- Synchronous Serial Data Rates up to 10 Mbits/sec
- Asynchronous Serial Data Rates up to 1 Mbits/sec
- Deep Transmit and Receive FIFOs up to 128K
- PMC and cPCI rear I/O support
- Custom Protocols Available
Serial I/O Selection Tables
- Cable Transfer speeds up to 400 mb/per second
- Large FPGA provides for flexable cable interface
- Several cable transceiver options including RS-422, RS-485, LVDS, PECL, and TTL
Digital I/O Selection Table
|
Compared to standard desktop PCI, CompactPCI supports twice as many PCI slots (8 versus 4) and offers a packaging scheme that is much better suited
for use in industrial applications. For example, Compact PCI cards are designed for front loading and removal from a card cage. The cards are firmly held in position
by their connector, card guides on both sides, and a face plate which solidly screws into the card cage. Cards are mounted vertically allowing for natural or forced air
convection for cooling. Finally, the pin-and-socket connector of the CompactPCI card is significantly more reliable and has better shock and vibration characteristics than
the card edge connector of the standard PCI cards.
Any PMC I/O board can be used on PCI Express, PCI-X, cPCI-X, PCI, cPCI, PC-104-Plus via an adapter. Our I/O
boards are being converted to PCI Express boards as opportunities arise, view our extensive line of I/O boards.
We have software drivers available for numerous operating systems including VxWorks, Linux, and Windows.
Click Here for more information on software driver availability.
|
|
