; $URL: http://subversion:8080/svn/gsc/trunk/drivers/LINUX/16AI64/16AI64_Linux_3.x.x.x_DN/doc/release.txt $
; $Rev: 55157 $
; $Date: 2024-08-30 10:50:23 -0500 (Fri, 30 Aug 2024) $

16AI64: Linux Driver Release Notes

Revision History
================

--------------------------------------------------------------------------------

Version 4.5.111.50.0, Released 8/30/2024

driver: Updated to support the 6.x series kernel.
driver: Updated for Fedora 38.
driver: Renamed all Auto Cal content to Autocal.
driver: Renamed all Auto Cal Sts content to Autocal Status.
driver: Updated some comments for consistency.
driver: Updated a few IOCTL services for consistency.
driver: Corrected error message text.
driver: Updated the Rx Debug support.
driver: Remove Red Hat 8 compiler warning (2.4 kernel).
driver: Corrected log message when excusive open request fails.
driver: White space cleanup.
driver: Fixed an issue where the register id is zero (for testing purposes).
driver: Updated and expanded error reporting.
driver: Added RX DEBUG capabilities.
driver: Updated comments for consistency.
driver: Corrected a comment.
driver: LINTed the sources for the 2.4 kernel builds.
driver: LINTed sources.
driver: Updated to address Fedora 38 complaints.
driver: Added global driver unloading flag.
driver: Added "unloading" message when unload service is called.
driver: Updated for changes after the 5.17.15 kernel.
driver: Updated to support the 6.x kernel.

--------------------------------------------------------------------------------

Version 4.4.101.44.0, Released 10/18/2022

driver: Added support for the 5.x kernel series.
driver: Updated for porting to Windows.
driver: Standardized various IOCTL system log messages.
driver: Standardized processing of the initialization IOCTL service.
driver: Standardized processing of the autocalibration IOCTL service.
driver: Updated comments for consistency.
driver: Removed unused macros.
driver: Updated per some file reorganization.
driver: Removed unintended debug output statements.
driver: Renamed gsc_irq_reset_pci to gsc_irq_cpi_reset for consistency.
driver: Segregated additional PLX specific code.
driver: Updated system message to begin with the driver module name.
driver: Began implementation for MSI support.
driver: Segregated all PLX specific code to accommodate alternate device implementations.
driver: Updated debugging display output.
driver: LINTed sources.
driver: Added temporary experimental write code in gsc_write.c for performance testing.
driver: The code is partially retained but is not included for compilation.
driver: Updated some comments for consistency.
driver: White space cleanup.
driver: Updated for changes to Red Hat Enterprise Linux 8.6.
driver: Added the os_irq_t.created field.
driver: Updated os_irq_create, destroy, open and close services.
driver: Removed unused debugging messages.
driver: Began implementing MSI support.
driver: Added macro DEV_IRQ_SHOW to report assigned IRQ assigned to device.
driver: Updated for the 5.14 kernel.
driver: Made spelling corrections in version notes.
driver: Changed all printk instances to printf to support porting activities.
driver: Expanded files removed for a clean operation.
driver: Updated to support the 5.9 kernel.
driver: Modified os_common.h so application code compiles under Cygwin.
driver: Reduced the minimum tick sleep from 1 to 0 ticks.

--------------------------------------------------------------------------------

Version 4.3.94.36.0, Released 8/10/2021

driver: Fixed a DMA bug relating to the use of a timeout setting of zero.
driver: Corrected endian error message.
driver: Fixed a timeout bug in gsc_write_pio_work_32_bit().
driver: Updated IRQ code for improved clarity and modularity.
driver: Updated DMA code to support multiple DMA implementations.
driver: Removed I/O debug code.
driver: Removed compiler warnings under Windows.
driver: Fixed a IOCTL bug in which alt->sem wasn't being unlocked.
driver: Increased modularization for porting effort to another OS.
driver: Made DMA code more modular.
driver: Added support for Big Endian hosts.
driver: Updated per OS specific DMA memory allocation interface.
driver: Modified debug specific register access code to enhance usage.
driver: Improved Red Hat Enterprise Linux 8.x detection logic.
driver: Added support under the 4.x kernel for Red Hat Enterprise Linux 8.x.
driver: Added validation checking of the interrupt number in os_irq_open().
driver: Updated the /proc/ code for changes in the 5.6.6 kernel.
driver: Updated memory code for improved clarity and modularity.
driver: Code cleanup in open service.
driver: Fixed open bug applicable to multi-board devices.
driver: Made mods to accommodatedate porting to another OS.
driver: Added support for the 5.x kernel series.
driver: Added DMA support for an IOMMU.
driver: Added error reporting when DMA memory cound not be allocated.
driver: Reduced code included when read and writ are both unsupported.
driver: Added error reporting when IRQ cound not be acquired during open requests.
driver: Some minor code reorganization.

--------------------------------------------------------------------------------

Version 4.3.85.27.0, Released 5/2/2019

driver: Changes some I/O argument names for consistency and clarity.
driver: Corrected a DMA comment.
driver: Fixed bug in gsc_dma_perform(): timeouts were being ignored.
driver: Fixed bug in gsc_dma_perform(): the timeout detection logic was incorrect.
driver: Improved register validation.
driver: Subsystem Vendor ID and Subsystem ID can each be ignored if -1 in device table.
driver: #define for GSC_REG_ENCODE_MASK is moved here from gsc_reg.c.
driver: Enhanced error reporting for the process of validating register definitions.
driver: Fixed bug in DMA completion code.
driver: Updated initialization for the write service.
driver: Updated BAR creation logic.

--------------------------------------------------------------------------------

Version 4.2.81.26.0, Released 2/1/2019

driver: Modified code so open succeeds even if initialization fails.
driver: Updated per changes to common code.
driver: Updated muti-channel ISR code for new I/O streams structure.
driver: DEV_WAIT_IO_ALL is now required if WAIT is supported along with READ or WRITE
driver: I/O WAIT macros are now defined by the device API and are passed to GSC code in dev_io_t.
driver: Updated Block Mode DMA macro name (_DMA to _BMDMA).
driver: Added I/O, DMA and register access debug code.
driver: Added stream selection field in the "size" argument for the read and writecalls.
driver: Added OS IRQ calls: os_irq_create() and os_irq_destroy()
driver: Renamed field in gsc_irq_t for clarity.
driver: Fixed a bug in which wait list node removal didn't always have the list locked.
driver: Added support for some DMA metrics.
driver: Improved IOCTL argument validation.
driver: Moved a typedef to device specific code.
driver: Implemented support for a stream selection field in the I/O bytes argument.
driver: Implemented register access debug code.
driver: Implemented calls: os_irq_create() and os_irq_destroy()
driver: Field in gsc_irq_t renamed for clarity.
driver: Changed macro name for clarity.

--------------------------------------------------------------------------------

Version 4.1.75.21.0, Released 3/9/2018

driver: Bug fix: was ignoring BAR setup return value.
driver: Updated per changes to the OS specific PCI services.
driver: Made updates for DEV_SUPPORTS_XXX macro changes.
driver: Added Low Latency support.
driver: Udated some utility services: applying a setting end by reading it back
driver: Updated for support of some drivers under older kernels.
driver: Updated #include files for consistancy.
driver: Fixed a DMA timeout calculation bug.
driver: Updated to accommodate porting to Windows KMDF.
driver: Updated per changes to the low level register interface.
driver: Updated the driver initialization logic.
driver: Updated IOCTL init and reset code.
driver: Added support to exclude the WAIT feature.
driver: Updated macros to include/exclude IRQ support.
driver: Fixed bug in init code where last PCI device is one of ours.
driver: Fixed register definitions for the PEX8111 and PEX8112.
driver: Updated to accomodate Fedora 27.
driver: Updated the low level register interface.

--------------------------------------------------------------------------------

Version 4.0.68.18.0, Released 12/5/2016

driver: Updated to use the newer common driver sources.
driver: Removed GNU notice from non-Linux specific files.
driver: Removed Linux specific content from non-Linux specific source files.
driver: White space cleanup.
driver: Now using a spinlock rather than enabling and disabling interrupts.
driver: Updated gsc_irq_open() and gsc_irq_close().
driver: Updated gsc_dma_open() and gsc_dma_close().
driver: The BAR code has been updated to include the data under a single structure.
driver: The register definitions have been updated.
driver: I/O services now pass around an os_mem_t structure instead of a buffer pointer.
driver: White space cleanup.
driver: Changed the arbitrary wait event callback argument to a void* type.
driver: Reduced #include list in driver interface header.
driver: Modified to allow multiple apps to simultaneously access a single device.
driver: Improved ISR's handling of interrupts, especially for firmware with the irq anomaly.
driver: Corrected spelling of "anomaly".
driver: Correct access to BAR0 and BAR1 (is RO, was RW).
driver: Added an infinite I/O timeout option.
driver: Corrected the IOCTL code for the register write and mod services.

--------------------------------------------------------------------------------

Version 3.1.52.0, Released 2/27/2014

Driver version 3.1.52
Driver: Reduced #include list in driver interface header.
Additional LINTing.
White space cleanup.

--------------------------------------------------------------------------------

Version 3.0.51.0, Released 1/8/2014

Driver version 3.0.51
Driver: Modified the conditional definition of flags used by kmalloc().
Driver: Updated /proc file support for the 3.10 kernel changes.
Driver: Additional porting for the 2.2 kernel.

--------------------------------------------------------------------------------

Version 3.0.50.0, Released 11/15/2013

Driver version 3.0.50
Driver: Added support for Abort Interrupt processing on 9080 based boards.
Driver: Enhanced DMA error handling for Abort Interrupts.
Driver: The IOCTL command code is now treated as an integer.
Driver: Numerous minor changes for LINTing of the code.
Driver: Numerous updates for Concurrent and for PEX8311 issues.

--------------------------------------------------------------------------------

Version 3.0.45.0, Released 7/16/2013

Driver version 3.0.45
Driver: Freeing the board interrupt is now conditioned upon it being acquired.
Driver: Corrected definition of register GSC_PLX_9056_PABTADR.
Driver: Added support for the Bus Abort interrupt.
Driver: Updated DMA reads to improve performance.

--------------------------------------------------------------------------------

Version 3.0.42.0, Released 5/11/2013

Driver version 3.0.42
Initial release of the 3.x series driver.

--------------------------------------------------------------------------------
